Control Board - EuroLite LED PAR-64 RGBAW 49x3W Short Bedienungsanleitung

Control Board

The Control Board offers several features: you can e. g. simply set the starting address.
Enter the menu by pressing the Fun-button. You can change the selection by pressing Up or Down. Press
Enter in order to select the desired menu. You can leave every mode by pressing the Fun-button. The
functions provided are described in the following sections.
Display
ADDR 001-506
M-DM
M-AU
MODE
M-SO
PRCO PR1-8
SPCO SP01-15
ALL
RED
GREEN
TEST
BLUE
WHITE
AMBER
STND
DSPL
REV
REST REST/ON
Function
DMX address setting
With this function, you can adjust the desired DMX 512 address via the
Control Board.
DMX mode setting
the device will automatically detect whether DMX 512 data is received or
not. If there is no data received at the DMX-input, the control LED will flash.
Automatic program mode
With this function, you can adjust the Auto mode.
Please note: On the rear panel of the device you can find an XLR-jack
(DMX Out) and an XLR-plug (DMX In), which can be used for connecting
several devices.
Choose the device which is to control the effects. This device then works as
master-device and controls all other slave-devices, which are to be
connected to the master-device via a balanced microphone lead. Connect
the DMX OUT-jack with the DMX IN-plug of the next device.
Set to DMX mode with DMX address 001 for all slave-devices.
Sound-controlled mode
With this function, you can adjust the sound-controlled mode.
Please note: On the rear panel of the device you can find an XLR-jack
(DMX Out) and an XLR-plug (DMX In), which can be used for connecting
several devices.
Choose the device which is to control the effects. This device then works as
master-device and controls all other slave-devices, which are to be
connected to the master-device via a balanced microphone lead. Connect
the DMX OUT-jack with the DMX IN-plug of the next device.
Set to DMX mode with DMX address 001 for all slave-devices.
Built-in program setting
With the function "PR. 1-8" you can run the internal programs.
Pr. 1 – 4 switching
Pr. 5 – 8 fading
Program speed setting
With this function you can set the program speed.
With this function you can test all LEDs on its (correct) function.
With this function you can test the red LEDs on its (correct) function.
With this function you can test the green LEDs on its (correct) function.
With this function you can test the blue LEDs on its (correct) function.
With this function you can test the white LEDs on its (correct) function.
With this function you can test the amber LEDs on its (correct) function.
Display setting
With this function you can to turn the display upside down.
Reset
With this function you can restore the factory settings of the device.
20/22 00061815.DOC, Version 1.0