Description; Features; Installation; Overhead Rigging - EuroLite LED PAR-64 RGBAW 49x3W Short Bedienungsanleitung

DESCRIPTION

Features

Powerful LED PAR-64 spot with 3 W LEDs in 5 colors
• Operable in stand-alone mode or via DMX interface
• DMX control via any standard DMX controller
• Sound-control via built-in microphone
• Microphone-sensitivity adjustable via rotary-control
• Equipped with 49 x 3 W LEDs: 10 x red, 10 x green, 10 x blue, 9 x amber and 10 x white
• RGBAW color changing
• Static colors
• Color change and strobe speed adjustable
• 8 internal programs
• Dimmer
• Locking possibility at the mounting bracket
• Addressing via control panel with 4-digit LED display
• For illuminating e. g. entrance or counter areas or as basic illumination
• Perfect in public places, main halls, stages and lounges
• Ready for connection with power cord and safety-plug
• Available in alu or black

INSTALLATION

Overhead rigging

Please consider the EN 60598-2-17and the respective national standards during the installation!
The installation must only be carried out by an authorized dealer!
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural rigger. Improper installation can result in bodily injury and.or
damage to property.
DANGER TO LIFE!
16/22 00061815.DOC, Version 1.0