Fm Operation - Renkforce 1598214 Bedienungsanleitung

All manuals and user guides at all-guides.com
d) FM Operation
Station search
• Briefly push the PREV (4) or NEXT (8) button to change the reception frequency step by
step manually. Every push of a button changes the reception frequency in steps of 50 kHz.
• Keep the PREV (4) or NEXT (8) button pushed to start station scan downwards or upwards.
• If a FM station with sufficiently strong signal is found, the scan stops and the station is played
back.
Please set weaker stations by manual station selection.
Use the menu to set if the automatic station scan is to find only strong stations or all
stations. Scanning for all stations may lead to the station scan stopping after every
frequency stop in some broadcasting areas. In this case, set the search setting to
strong stations only.
Station storage
• The device can save up to 10 FM stations.
• The station storage, selection of the stored stations and deletion of stored stations take place
as described for DAB operation.
Calling station information
• Push the button MENU (3) briefly to display various types of information on the station, time
and date you just listened to in the third line of the display (9).
• Push the MENU button (3) once more to move to the next display.
• The contents of the displayed station information depend on the station.
Further operating options can be found in the menu
• Push the button MENU (3) for a longer time to display the menu.
• The following menu items refer to FM operation.
Scan setting
Audio setting
36
Specifies whether the station scan is to find only strong stations
or all stations.
Specifies whether audio is received in mono or stereo.
For weak stations, mono reception is recommended, since this
produces less noise.