12. Technical data
Application
Application
Equipment
Operation and
Principle
system
construction
Measurement
system
Interface
Inputs
Input
Number of inputs Analogue input: 1
Accuracy
Analogue input
Digital input
Temperature
influence
Time drift
Environmental
Installation conditions
conditions
Installation hint
Environmental conditions
Ambient temp.
Storage temp.
Climate class
Measured value collector for recording and storing
analogue and digital values
Data-logger
Measured value recording using analogue/digital
conversion. The measured values are updated every
second and, after a selectable storage cycle time, are
stored in an internal memory, which can store 4000
measured values (optionally 16000 measured
values). Data can be transferred to a Personal
Computer using the ReadWin software package. This
means the data can then be processed further.
Analogue: Data-logger Mini-Log B and separate
0/4...20 mA, 0...1 V and Pt100 transmitter
Digital: Data-logger Mini-Log B and potential free
contact
RS 232 max. cable length 8 m,
a complete RS 232 interface cable 1.5 m long and
the ReadWin software package is optionally available
Universal application
analogue: transmitter must have 0/4...20 mA, 0...1 V
output signal or direct Pt100
digital: potential free contact
Note: Mini-Log B has no loop power supply
Digital input: 1
0...1 V, R
>= 1 MOhm
i
Accuracy +/- 0.25 % FSD
0/4 mA...20 mA,via shunt, R
Cable open circuit monitor < 2 mA (on 4...20 mA)
Accuracy +/- 0.25 % FSD
Pt100, -100...+400 °C, screened cable
Accuracy +/- 0.5 °C, Cable open circuit monitor
1 input using two terminals, f
for potential free contact
Temperature drift +/- 0.25 % / 10 K
+/- 50 ppm (<= 30 min/year)
The unit should be mounted vertically, for this a wall
or stand pipe mounting kit can be ordered.
-25 °C...+55 °C
-25 °C...+60 °C
IEC 654 Part 1 class C1
12. Technical data
= 50 Ohm
i
= 25 Hz,
max
41