Herunterladen Inhalt Inhalt Diese Seite drucken

Setting Up; Display - Endress+Hauser Minilog B RDL10 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für Minilog B RDL10:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6. Setting up

6. Setting up

6.1 Display

The following symbols can be displayed during operation.
1
2
Low battery display:
Ê
Measurement continues for approx. 30 days after the low
battery display is activated.
In order to achieve continuous recording the data should be
read out and the battery changed as swiftly as possible.
(See 6.4 Changing battery)
7 digit numeric block:
Ë
The actual values are displayed as a numeric block.
Every 5 seconds the display scrolls as follows:
Attention: Dependent on the unit settings the inputs can be
scrolled in a different manner. For example should the digital
input be inactive then it would not be displayed. The display
then scrolls from the analogue value to time every 5 seconds.
Limit markings:
Ì
The unit can monitor two internal set points.
These are defined using the ReadWin software package.
Should the unit recognise a set point infringement it displays
this using the appropriate symbol.
Example: The left symbol will be the low set point and the right
symbol an upper set point.
30
3
Analogue value -> digital value -> time

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis