Technical Data - Husqvarna 136Li Bedienungsanweisung

Technical data

Motor
Type
Features
Low energy mode
Lubrication system
Type of oil pump
Oil tank capacity, litre/cm
Weight
Chain saw without battery, bar and chain, empty chain oil tank, kg
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Respective uncertainty KpA, dB(A)
Sound levels (see note 2)
Equivalent sound pressure level at the operator's ear, dB(A)
Vibration levels (see note 3)
2
Front handle, m/s
2
Rear handle, m/s
Respective uncertainty K, m/s
Equivalent vibration levels (see note 4)
2
Front handle, m/s
2
Rear handle, m/s
Chain/bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (savE), m/s
Approved batteries for the chain saw models above
Battery
Type
Battery capacity, Ah
Voltage, V
Weight, kg
Approved chargers for the specified batteries, BLi.
Battery charger
Mains Voltage, V
Frequency, Hz
Power,W
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
Note 3: Vibration level, according to EN 60745-2-13. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
and recommended chain type. If the machine is fitted with a different bar length, the vibration level may vary by max ± 1.5
2
m/s .
Note 4: Equivalent vibration level is measured and calculated as for combustion engine powered chainsaws. These figures
are quoted to be able to compare vibration data regardless of type of engine.
32 – English
TECHNICAL DATA
3
dB (A)
WA
2
BLi110 BLi150
Lithium-Ion Lithium-Ion
3.0 4,2
36 36
1,2 1,3
QC80 QC120
100-240 220-240
50-60 50-60
80 125
2
. Declared vibration data from measurements when the machine is fitted with a bar length
136Li
36V Brush motor
savE
Automatic
0,20/200
4,8
97,3
101
3.0
86
3,61
2,25
1,5
2,29
1,58
12/30
10/26
Spur/6
11 (10)
QC330
100-240
50-60
330
) in conformity with EC directive 2000/14/EC.
WA
1156931-38 Rev.2 2016-11-29