Herunterladen Diese Seite drucken

Safety And Regulatory Information - Victron energy Centaur Charger 12/200 Bedienungsanleitung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Safety and regulatory information

General
• Review related documentation of this product to familiarize
yourself with safety markings and instructions before you operate
the equipment.
• This product has been designed and tested in accordance with
international standards. Only use the equipment for the intended
purpose of application.
• WARNING: RISK OF ELECTRIC SHOCK. The product is used in
conjunction with a permanent energy source (battery). Even if the
equipment is switched off, dangerous electrical voltages may
appear at the in- and/or output terminals. Always disconnect AC
power and battery before maintaining or servicing the product.
A Ground Fault Circuit Interrupter (GFCI) must be installed in the
AC supply circuit.
• There are no user-serviceable parts inside. Do not remove the
front plate or operate the product without the front plate fitted.
Refer all servicing to qualified personnel.
• Never use the product in locations where there is danger of gas-
or dust explosions. Consult your supplier to ensure that the
product is intended for use in conjunction with the battery. Always
apply the battery manufacturer's safety instructions.
• Caution: never carry heavy loads without assistance.
• Explosive gases can be generated during charging of a lead-acid
battery. Prevent open flame and sparks. Take care of sufficient
ventilation during charging.
• Never try to recharge non-rechargeable batteries.
• A double-pole switch with a minimum contact distance of 3mm
must be incorporated in the fixed mains input wiring of the
installation.
1

Werbung

loading