Victron energy Centaur Charger 12/200 Bedienungsanleitung Seite 7

TROUBLESHOOTING
Problem
Charger does not function
The battery does not get
fully charged
The battery is being
overcharged
Possible cause
The mains is not ok
Input or output fuses are defective
A bad battery connection
The battery select switch
is in wrong setting
Battery capacity to large
The battery select switch
is wrong setting
A single cell in battery is defective
Too small battery
Solution
Measure mains
Return product to
your dealer
Check battery
connection
Select correct
battery
type (see Fig1)
Make sure charger
capacity matches
battery
Select correct
battery
type (see Fig1)
Replace battery
Consult your battery
supplier
5