Victron energy Centaur Charger 12/200 Bedienungsanleitung Seite 13

4. Specifications
Centaur Charger
Common characteristics
Charge voltage 'absorption'
(V DC)
Charge voltage 'float'
(V DC)
Output banks
Charge current (A)
(2)
Total output ammeter
Charge characteristic
Recommended battery
capacity (Ah)
Temperature sensor
Forced cooling
Protection
Operating temp. range
Ignition protected
Humidity (non condensing)
ENCLOSURE
Material & Colour
Battery-connection
AC-connection
Protection category
Weight kg (lbs)
Dimensions
hxwxd in mm
(hxwxd in inches)
STANDARDS
Safety
Emission
Immunity
1)Standard setting.
Optimum charge/float voltages for Flooded Lead-acid, Gel-Cell or AGM batteries selectable by dip switch.
2) Up to 40 °C (100 °F) ambient.
Output will reduce to approximately 80 % of nominal at 50 °C (120 °F) and 60 % of nominal at 60 °C (140°F).
12/20 12/30 12/40
24/16
Input voltage: 90 – 265 V
20 30/ 16 40
IUoU (Three stage charging)
80 - 120- 160-
200 300 400
45-
150
Internal, - 2mV / °C (- 1mV / °F) per cell
Yes, temperature and current controlled fan
Output short circuit, over temperature
aluminium (blue RAL 5012)
M6 M6 M8
studs studs studs
screw-clamp 4 mm² (AWG 6)
3,8 5 (11)
3,8 (8.4)
(8.4)
355x215 355x215 426x239
x110 x110 x135
( ( (
14.0x8.5 14.0x8.5 16.8x9.4
x4.3) x4.3) x5.3)
EN 55014, EN 61000-3-2, EN 61000-3-3
12/60 12/80 12/100
24/30 24/40 24/60
Input frequency: 45 – 65 Hz
14,3 / 28,5
(1)
13,5 / 27,0
(1)
3
60/ 30 80/ 40 100/ 60
Yes
240- 320- 400-
600 800 1000
120- 160- 240-
300 400 600
- 20 to 60°C (0 - 140°F)
Yes
max 95%
M8 M8 M8
studs studs studs
IP 21
5 (11) 12 (26) 12 (26)
426x239 505x255 505x255
x135 x130 x130
( ( (
16.8x9.4 19.9x10.0 19.9x10.0
x5.3) x5.2) x5.2)
EN 60335-2-29, UL 1236
EN 55014-2
12/160 12/200
24/80 24/100
Power factor: 1
160/ 80 200/ 100
640- 800-
1600 2000
320- 400-
800 1000
M8 M8
studs studs
16 (35) 16 (35)
505x255 505x255
x230 x230
( (
19.9x10.0 19.9x10.0
x9.1) x9.1)
11