Herunterladen Inhalt Inhalt Diese Seite drucken

Safety And Regulatory Information - Victron energy Centaur Charger 12/20 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Centaur Charger 12/20:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Safety and regulatory information

General
• Review related documentation of this product to familiarize yourself
with safety markings and instructions before you operate the
equipment.
• This product has been designed and tested in accordance with
international standards. Only use the equipment for the intended
purpose of application.
• WARNING: RISK OF ELECTRIC SHOCK. The product is used in
conjunction with a permanent energy source (battery). Even if the
equipment is switched off, dangerous electrical voltages may appear
at the in- and/or output terminals. Always disconnect AC power and
battery before maintaining or servicing the product.
A Ground Fault Circuit Interrupter (GFCI) must be installed in the AC
supply circuit.
• WARNING: This appliance is not intended for use by young children
or infirm persons unless they have been adequately supervised by a
responsible person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play
with the appliance.
• There are no user-serviceable parts inside. Do not remove the front
plate or operate the product without the front plate fitted. Refer all
servicing to qualified personnel.
• Never use the product in locations where there is danger of gas- or
dust explosions. Consult your supplier to ensure that the product is
intended for use in conjunction with the battery. Always apply the
battery manufacturer's safety instructions.
• Caution: never carry heavy loads without assistance.
• Explosive gases can be generated during charging of a lead-acid
battery. Prevent open flame and sparks. Take care of sufficient
ventilation during charging.
• Never try to recharge non-rechargeable batteries.
• A double-pole switch with a minimum contact distance of 3mm must
be incorporated in the fixed mains input wiring of the installation.
1

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis