System Settings - VOLTCRAFT 1897504 Bedienungsanleitung

d) System settings
The measuring instrument allows the system data relevant to the user to be set via a menu. Such data includes the
menu language, units of measurement, time and date, etc.
These system settings must be made in advance so measurements can be stored with a time stamp, etc.
• When the measuring instrument is on, press the SET button to return to the main menu.
• Press the "left arrow" (4) or "right arrow" (8) cursor buttons until the gear symbol
• Press the "SET" button to confirm the selection. The system settings menu will now open.
Due to the size of the display, only seven menu areas can be displayed. Use the cursor buttons (4/8) to move the
menu. The selected menu item will be highlighted in colour.
• To activate the menu item, press the "SET" button.
• Use the cursor buttons to select the respective parameters and press the "SET" button to confirm the selection.
• Use the "Back" button (1) to exit the menu item.
The system menu has the following setting functions:
Original
Language
Date/Time
Emissivity
Auto OFF
Brightness
Temp Unit
Temperature Alarm
About
Format SD
Recovery
Auto Save
Temp Bar
34
National lan- Meaning
guage
Sprache Menu language selection
Datum/Zeit Date and time setting
Emissivität Emission level setting
Auto Aus Automatic power-off setting
Helligkeit Setting the display brightness
Temp Einheit Temperature unit setting
Temperatur Alarm Setting for temperature alarms when exceeding or falling below
certain levels
Systeminfo System data display (model, memory card size, software version, etc.)
Format SD Formatting the memory card
Wiederherstellen Restore to factory settings
Auto Speichern Setting whether images should be saved without a new query after
pressing the memory button.
Farbbalken Display of colour distribution as a bar
is marked.