Menu Settings; Temperature Unit Selection - VOLTCRAFT WBP-90 Bedienungsanleitung

11. Menu Settings

a) Temperature unit selection
Navigate to the temperature unit selection (D) menu , then choose °C or °F units of measurement.
b) Center point position and high/low temperature tracking
Navigate to the temperature tracking options (E) menu
same time.
• Center point : The target in the middle of the screen is where
the temperature is being measured. The value is shown at the top
left of the display.
• High/low temperature tracking
temperature values on the screen are marked by dynamic
indicators: [H] High, [L] Low
The bar on the right shows high/low values and the corresponding
colour.
. You can activate one or both options at the
: The highest and lowest
41