Technical Data; Technical Data For Pp 45 - Maico PushPull RLS 45 O Bedienungsanleitung

UK | 12 Technical data
Red
Fault
LED
Internal error in
control
Master-slave com-
munication
Internal sensor
defective (I2C)
External sensor
not reporting.
No communication
with the EnOcean
module (PP 45 EO)
The faults are not acknowledged. Acknowl-
edgement takes place automatically when
the fault is remedied.
58
Display
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly once
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly twice
Fault LED in
alternation: lit up
for extended period
and then flashes
briefly three times
Fault LED in
alternation: lit up
for extended period
and then flashes
briefly four times
Fault LED in
alternation: lit up
for extended period
and then flashes
briefly five times

12 Technical data

12.1 Technical data for PP 45

External diameter
Wall sleeve max. length 500 or 800 mm
Wall thickness min.
max.
Air filter outside
Air filter inside
Air volume/unit
Protection class / degree
of protection
Sound pressure level,
at distance of 1 m
conditions without ob-
structions
(ventilation level 1 to 5)
Rated voltage/
power frequency
Volumetric flows for
ventilation levels
1, 2, 3, 4, 5
Power consumption
Permissible ducting
lengths
with wired
connection
Radio components:
Frequency range
(in acc. with
EN 300220-1)
"Wireless" operating
distances in the building
are dependant on the
building materials used:
●
DS 45 RC  PP 45 RC
●
PP 45 EO  PP 45 RC
●
PP 45 RC  PP 45 RC
● With PP 45 RC as
signal booster
DN 160
265 mm
490 / 790 mm
G3
G2
42 m³/h
IP 00 / 2
23 / 28 / 33 /
37 / 40 dB(A)
230 V
50/60 Hz
15 / 20 / 30 /
36 / 42 m³/h
1.2 / 1.7 / 2.1 /
2.8 / 3.5 W
From star point
max. 25 m per
ventilation unit
868.35 MHz
up to:
30 m
30 m
30 m
40 m