Checking Drive Belt - Comprag FV30 Bedienungsanleitung

Fig. 5.2 Checking oil level
5.3

Checking drive belt

Fig. 5.3 Cheking drive belt.
26
Check on a daily basis drive belts condition
and the tension on drive belts.
In order to access the belt, stop the
com-pressor
side panel. Inspect belts (1) for signs
of wear on side edges and for cracks.
If belts are damaged, then they should be
replaced
Using belt tension gauge, check the tensile
force of the compressor belts.
1
1
and remove the right
Version 1.5