Alarm Mode - Renkforce 2203406 Bedienungsanleitung

d) Alarm mode
The alarm time can be set in this mode as well.
• The base station must be in normal mode. Now briefly push the "ALARM" (6) button to start the alarm mode.
• The two lower text lines show "HIGH ALARM".
To leave the alarm mode in any place, briefly push the button "HISTORY" (7). The settings made are saved.
Alternatively, wait for 30 seconds without pushing a button. Alarm mode is ended automatically in this case.
• Pushing the "ALARM" (6) button again switches between "LOW ALARM" and "HIGH ALARM".
The following settings are available at "HIGH ALARM":
"TIME ALARM"
"LIGHT HIGH ALARM"
"UVI HIGH ALARM"
"IN TEMP HIGH ALARM"
"IN HUMI HIGH ALARM"
"OUT TEMP HIGH ALARM"
"OUT HUMI HIGH ALARM"
"ABS BARO HIGH ALARM"
"REL BARO HIGH ALARM"
"WIND HIGH ALARM"
"GUST HIGH ALARM"
"DEW POINT HIGH ALARM"
"HEAT INDEX HIGH ALARM"
"RAIN RATE HIGH ALARM"
"RAIN DAY HIGH ALARM"
The following settings are available in "LOW ALARM":
"IN TEMP LOW ALARM"
"IN HUMI LOW ALARM"
"OUT TEMP LOW ALARM"
"OUT HUMI LOW ALARM"
"ABS BARO LOW ALARM"
"REL BARO LOW ALARM"
"WIND CHILL LOW ALARM"
"DEW POINT LOW ALARM"
" (3) or "
• Use the "
If the area with the time (upper left in the display) is selected, the lower text lines show "TIME ALARM" and
you can set the alarm time.
• Change the flashing value with the "
adjustment.
Alarm time
Lighting strength
UV-index
Indoor temperature
Indoor humidity
Outdoor temperature
Outdoor humidity
Absolute barometric pressure
Relative barometric pressure
Wind speed
Wind gust speed
Dew point
Heat index
Rain volume
Daily rain volume
Indoor temperature
Indoor humidity
Outdoor temperature
Outdoor humidity
Absolute barometric pressure
Relative barometric pressure
Wind-chill temperature
Dew point
" (4) buttons to select the alarm you want to set. The respectively selected value flashes.
" (1) or " " (2) button. Keep the respective button pressed for quick
67