Setting Mode - Renkforce 2203406 Bedienungsanleitung

c) Setting mode
• The base station must be in normal mode. Now keep the button "SET" (5) pushed for 2 seconds to start setting
mode.
• T he two lower text lines show the first setting function "TIME SETTING".
To leave the setting mode in any place, briefly push the button "HISTORY" (7). The settings made are
saved.
Alternatively, wait for 30 seconds without pushing a button. Setting mode is ended automatically in this
case.
" (3) button to chosen between the different setting functions. For a description of the following setting
• Use the "
functions, see the next pages.
"TIME SETTING"
"UNIT SETTING"
"RECORD SAVE INTERVAL"
"RAIN SEASON SETTING"
"BAROMETRIC SETTING"
"CONTRAST SETTING"
"KEY BEEP SETTING"
"REREGISTER TRANSMITTER"
"CALIBRATION SETTING"
"TRANSMITTER ID"
• When the desired setting function is displayed, briefly push the "
• Change a setting with the button "
date), quick adjustment is possible if you keep the corresponding button pushed for a longer time.
• Switch to the next submenu within the respective setting function with the "
Setting function "TIME SETTING"
After starting setting mode (keep the "SET" (5) button pushed for 2 seconds), the setting function "TIME SETTING"
will appear.
Use the " " (4) button to select the desired subfunction:
• Subfunction "TIME FORMAT": Select the display format for the time
" (1) or "
Use the "
In 12 h display format, "am" will be displayed to the left of the time in the first half of the day, and "pm" in the second.
• Subfunction "DATE FORMAT": Select the display format for the date.
" (1) or "
Use the "
("YYYY").
62
" (1) or "
" (2) buttons to choose between "12H" (12 h display formal) or "24H" (24 h display formal).
" (2) buttons to select the display sequence for the date ("DD"), month ("MM") and year
" (4) button to start the associated setting menu.
" (2). In some setting functions (e.g. for manual setting of time/
" (4) button.