D) Displaying Time Of The Time Zone; Alarm Function; Displaying The Alarm Time; Setting Alarm Time - Renkforce 1267659 Bedienungsanleitung

d) Displaying Time of the Time Zone

Briefly press the button „DOWN" (5) to switch between the following time displays:
• Time display corresponds to the received DCF time
• Time display of the set time zone (e.g. DCF time + 2h); the symbol „ " appears to the
left of the time
e) Alarm Function
The weather station has two different alarm times. For example, you can set an alarm time
for the week days and another one for the weekend or holidays; you can also program
two alarm times per day, e.g. at 07:00 AM and 09:00 AM.

Displaying the Alarm Time

Briefly press the button „SET" (7) repeatedly to switch between the following displays:
• Alarm time 1 (display „A1" to the right of the alarm time)
• Alarm time 2 (display „A2" to the right of the alarm time)
• Time

Setting Alarm Time

• Push the button „SET" (7) several times until either the alarm time 1 (display „A1" to
the right of the alarm time) or the alarm time 2 (display „A2" to the right of the alarm
time) is displayed.
• Hold down the button „SET" (7) for about three seconds until the alarm time hours
flash in the display.
• Set the alarm time hours with the buttons „UP" and „DOWN". Keep the respective
button pressed for quick adjustment.
• Briefly push the button „SET" (7). The minutes of the time flash. Set them with the buttons
„UP" and „DOWN". Keep the respective button pressed for quick adjustment.
• Briefly push the button „SET" (7) to leave setting mode.
39