Automatic Time Setting; Manual Time Setting; Alarm; Set The Alarm Time - Renkforce 2377869 Bedienungsanleitung

Automatic time setting

8
After the power adapter is connected, the weather station will search automatically for the RCC (radio-controlled
clock) signal. When the signal is received, a sync-time symbol
signal receive status:
No signal
During radio signal reception, the display backlight is set to dimmed mode.
The time signal is synchronized daily.
You can enable or disable the RCC signal reception by pressing the RCC button for 8 seconds.

Manual time setting

9
If no radio signal is received, you can set the time and date manually:
1. Disable the RCC signal reception by pressing and holding the RCC button for 8 seconds.
2. Press and hold the
3. Use the and buttons to set the time.
4. Press the button to confirm the setting and move to the next parameter.
Sequence of the settings: 12/24 Hour format → hours → minutes → seconds → year → month → day → time
offset → language → Daylight saving time (Auto / Off).
If no button is pressed within 60 seconds, the weather station automatically exits setting mode.
DST (Daylight saving time) is enabled by default. If you do not want the time to be adjusted, select the DST
OFF option at the last parameter.
DST feature is only valid when RCC function is on.
The following languages are available:
EN (English), FR (French), DE (German), ES (Spanish), IT (Italian), NL (Dutch), RU (Russian)
b) Alarm

Set the alarm time

1
1. Press and hold the
2. Set the hour using the or buttons. Press and hold the button for quick adjustment.
3. Press the button (Alarm) to confirm the setting. The minute indicator flashes.
4. Set the minutes using the or buttons.
5. Press the button (Alarm) to confirm the setting.
In alarm mode, the
The alarm function will turn on automatically once you set the alarm time.
48
RCC signal received
button (TIME SET) for 2 seconds. The 12 or 24 Hr indicator starts flashing.
button (Alarm) for 2 seconds until the hour digit flashes.
icon will appear on the LCD.
will appear on the LCD. The signal indicator shows
Flashing symbol
Searching for signal