History Mode; Display - Renkforce 2203406 Bedienungsanleitung

f) History mode
In this mode, you can have the individual saved data records displayed that the base station files in its internal memory
due to the set measuring interval. The base station offers a total of 3552 memory slots.
• The base station must be in normal mode. Now briefly push the "HISTORY" (7) button to start the history mode.
To leave the history mode in any place, briefly push the button "HISTORY" (7).
Alternatively, wait for 30 seconds without pushing a button. History mode is ended automatically in this
case.
• The bottom-most display line shows "HISTORY NONE RECORD" when no data are present yet (e.g. at first com-
missioning or after reading and deleting the data via a PC).
If there are data records, e.g. the display "HISTORY P/R 15.08" and "YEAR/SECOND 15.33" appears.
P 15 = memory base 15 (each memory base has 32 data records)
R 08 = data record 08
YEAR 15 = year 2015
SECOND 33 = second 33
The time that belongs to the data record (hour/minute) and the date (time/month) of the data record is displayed at
the upper left in the display.
This way, you can determine precisely when the data record has been saved.
• You can use the "
respective button pressed for quick adjustment.
• You can use the "
respective button pressed for quick adjustment.
• To delete the data records in the base station, the base station must be in history mode. Keep the "SET" button (5)
pushed for at least 2 seconds then. "CLEAR RECORD" will appear at the bottom of the display. After 2 seconds,
all present data will be deleted.
If the memory is full, the respective oldest records are overwritten.
g) Display
For indoor temperature, outdoor temperature, indoor humidity, outdoor humidity, arrow symbols that indicate a trend
for in which direction the measured values are changing are displayed.
Icon Meaning
Rising
Consistent
Dropping
" (3) or " " (4) button to switch to the previous/next memory base ("P"), if present. Keep the
" (1) or " " (2) button to switch to the previous/next data record ("R"), if present. Keep the
Temperature
Temperature increase
>= 1 °C within 30 minutes
Temperature increase/drop
>= 1 °C within 30 minutes
Temperature drop >= 1 °C within 30
minutes
Humidity
Humidity increase
>= 10% within 30 minutes
Humidity increase/drop
< 10% within 30 minutes
Humidity drop
>= 10% within 30 minutes
69