Setting Up; Safety Notices; Checking The Contents Of The Package; Connecting The Charger - AUDIOLINE DECT5500+ Bedienungsanleitung

2.

Setting up

2.1

Safety notices

NOTICE! Before switching on, do not fail to read the safety notices on of the beginning of
these instructions.
2.2

Checking the contents of the package

The package should contain:
one charger
one handset with batteries
one set of directions for use
2.3

Connecting the charger

Set up the AUDIOLINE DECT5501+ within reach of a electricity supply socket.
1. Insert the connector on the lead from the transformer plug in the socket on the
underside of the charger and insert the transformer plug in a 230V supply socket
installed in accordance with regulations. For safety reasons, use only the transformer
plug supplied.
2. Press the cable into the cable channel leading to the rear of the charger.
2.4

Exchange the batteries

The rechargeable batteries (AAA, 1.2V, 550mAh) have a stand-by time of max. 350
hours and a maximum talk time of up to 14 hours.To fit or change the batteries, open
the battery compartment cover and insert the new batteries. Take care to ensure that
the polarity is correct and close the battery compartment cover. Always use rechargeable
batteries, type AAA 2 x 1.2V, only.
To increase performance, you can also use rechargeable batteries of the same type with
up to 1300 mAh capacity. In this way, the stand-by time is increased to ca. 700 hours
and the talk time to ca. 28 hours.
Important notice: Place the handset on the base station, with the display facing
forwards, for at least 16 hours. If the batteries are not properly charged, the telephone
may fail to function correctly. While the handset is charging, the battery capacity symbol
in the display will blink. The
position.
- Setting Up -
one supply cable
one belt clip
indicator lights as soon as the handset is placed in
31