6.5
Change display name
In normal operation, the display shows "DECT5501 HS1". If you have a number of
handsets operating from the one base station, it can be useful to give each handset a
name of its own. The name is followed by the number that is used to call the handset
internally.
1.
Press the menu button,
2.
Use
and
3.
Use
and
4.
Enter the desired name using the number buttons. Brief pressure on the
button can be used to erase single letters.
5.
Press
to store the new name.
6.
You can then select further menu functions or exit by holding down
6.6
Turning indicator tones on and off
There are various indicator and warning tones that can be turned on or off.
Button click
The handset emits a confirming click each time that a button is pressed. The button click
can be turned on or off.
Low battery warning
If the batteries are too low, a beeping warns that the handset needs recharging.
Range warning
If you are too far from the base station, a beep warns that you should move closer to it
in order to maintain contact.
1.
Press the menu button,
2.
Use
and
3.
Use
and
4.
Use
and
5.
Use
and
6.
You can then select further menu functions or exit by holding down
46
- Special Functions -
.
to select the HANDSET menu, then press
to select the NAME function, then press
.
to select the HANDSET menu, then press
to select the BEEP function, then press
to select KEYTONE, LOW BATT or OUTRANGE, then press
to select ON or OFF, then press
.
.
C /
.
.
.
C /
C /
.
.
.