Setting The Ring Melody Volume; Adjusting The Speaker Volume; Take Calls Automatically - AUDIOLINE DECT5500+ Bedienungsanleitung

6.2

Setting the ring melody volume

The volume of the handset ring melody can be set to one of five levels. If, at any time,
you do not wish to be disturbed, you can also turn off the ringing altogether. If the
ringing is turned off, incoming calls will only be signalled by the base station and on the
handset display.
1. Press the menu button,
2. Use and
3. Use and
4. Use and
5. You can then select further menu functions or exit by holding down
6.3

Adjusting the speaker volume

The speaker volume can be adjusted in five steps to take account of the surrounding
noise level.
1. Press the menu button,
2. Use and
3. Use and
4. Use and
5. You can then select further menu functions or exit by holding down
6.4

Take calls automatically

Incoming calls are taken automatically when you lift the handset from the charger. If you
wish to take calls only by using the
1. Press the menu button,
2. Use and
3. Use and
4. Use and
5. You can then select further menu functions or exit by holding down
- Special Functions -
.
to select the HANDSET menu, then press
to select the RING VOL function, then press
to select the desired volume level or OFF and press
.
to select the HANDSET menu, then press
to select the EAR VOL function, then press
to select a volume from 1 to 5 and then press
button you can turn this automatic function off.
.
to select the HANDSET menu, then press
to select the AUTO ANS function, then press
to select ON or OFF, then press
.
.
C /
.
.
.
C /
.
.
.
C /
.
.
.
.
45