Registering Handsets - AUDIOLINE DECT5500+ Bedienungsanleitung

2.7

Registering handsets

1. Hold down the paging button,
twice. You now have 90 seconds to register the new handset.
NOTE: During a log-on to a base station of another manufacturer, please have a
look in this operating instruction, as you prepare the base station for registering a
new telephone handsets. If you made the necessary inputs, continue with point 2.
2. Press the
3. Use and
4. Now use the number buttons to enter the number of the base station (1 - 4). If the
handset is already registered with a base station, the corresponding numbers will
blink.
5. Press the
6. Now enter the PIN number for the base station (factory setting, 0 0 0 0).
7. Now press the menu button,
The handset is now registered and can be used for external and internal calls.
8. An internal number will now have been allocated to the handset. The first handset
registered (main handset) has the internal number 1. Any further handsets that are
registered are allocated internal numbers (2 to 5) in the order of registration. This
internal number is shown in the display to the right of the name.
- Setting Up -
button on the handset.
to select the REGISTER menu, then press
button again.
on the base station for 10 seconds until it beeps
, and you will hear a beep for a few seconds.
.
33