Identification; Type Label - Cosmo CPH 2.0 CPH 4-25 Montage- Und Betriebsanleitung

COSMO High-efficiency pump CPH 2.0 35
CPH 2.0 circulation pumps are self-protected against:
– Overloads
– Phase failure
– Excess temperature
– Over and undervoltage.
Series CPH 2.0 circulation pumps permit the integral control of pressure difference,
whereby the pump outputs can be adapted to the effective system requirements.
This saves energy, improves control of the system, and reduces the noise level.
Integral functions and operating modes:
Proportional pressure
Constant pressure
Constant characteristic
Dry running protection
Automatic venting
Pumped media
Pure, highly fluid liquids that are suitable for central heating systems. The water
should comply with conventional standards such as e.g. VDI 2035. The medium may
not contain any aggressive or explosive additives. Similarly, the admixture of mineral
oils or fibrous particles is not permitted. The pump may not be used to convey
flammable or explosive media.
The water may not contain hydrocarbon derivates or aromatic products.
If an antifreeze medium must be added, its proportion may not be more than 30%.

5.1.2 Identification

5.1.3. Type label

The type label contains information on the manufacturer, year of manufacture,
production number, and the technical data.