Error Codes - BH FITNESS G6176TFT Bedienungsanleitung

ERROR CODES

E01 Possible motor overload
E02 No speed sensor signal
E04 Motor failure
E16 Calibration error
Do not hesitate to get touch with the Technical Assistance Service if you have any
queries by phoning customer services (see last page in manual).
a.- Lubricate the belt.
b.- Check that the motor is not burned.
c.- Check that the control board is not burned.
Check the position or replace the speed
sensor.
Check the motor wires. Replace the motor if
necessary.
Change the control board.
14