Operation Of The Powerbank - Megasat HD 1 Smart Bedienungsanleitung

5. Powerbank

5.2 Operation of the powerbank

1
2
3
4
Charge the powerbank
Connect the included Micro-USB cable to
the powerbank and a power source (eg
notebook, USB power adapter, ...). The char-
ging process takes about 3 hours.
Connect to the HD 1 Smart
Connect the included Micro-USB cable to
the Powerbank and the HD 1 Smart.
Note: Be sure to use the correct USB port
(DC 5V / 2.1A).
Turn on powerbank
Press and hold the power button until the
blue LEDs above the solar panel light up. The
power bank is now ready for use and can
supply power to connected USB devices.
LED flashlight
When switched on, press the power button
twice in succession to switch on the LED.
Press 1x briefly on the power button to turn
off the LED again.
ENGLISH
25