General; Safety Instructions; General Features; Delivery - Megasat HD 1 Smart Bedienungsanleitung

1. General

1.1 Safety instructions

• Never spill liquids of any kind on the device. Liquid increases the risk of electric
shock and damage to the product.
• The device is not shockproof. Make sure that it can not fall down from great heights.
• Do not immerse the device in the water. Avoid moisture and store the product in
a dry place.
• Turn off the device when not in use.
• Pay attention to the specified power supply. Use only the included power bank to
power the device.

1.2 General features

• Easy measurement of DVB-S / S2 signals through an LED display with signal level
and quality.
• Selection of up to 8 satellites and 8 transponders per satellite (freely editable).
• Power supply via set-top box or external USB device (eg power bank)
• 13 volts, 18 volts, 22 kHz switching as well as the found satellite are indicated by
LEDs (found signal is also played acoustically).
• Integrated Bluetooth® module for connection to a smartphone / tablet.
• App for iOS and Android with additional features:
- spectrum and constellation diagram
- Angle calculation to align the mirror
- Satellite and transponder editing via the app
- Integrated compass function with motion sensor that automatically
represents the current angle on the display. Turn and tilt the smartphone to
determine the correct position.
• DiSEqC 1.0, 1.1, 1.2, USALS, Unicable (EN 50494 and EN 50607).

1.3 Delivery

• Satmeter HD 1 Smart
• Strap
• Micro USB cable
• F-connection cable (20 cm)
• Powerbank
• User manual
ENGLISH
03