Diseqc 1.0 Settings; Diseqc 1.1 Settings - Megasat HD 1 Smart Bedienungsanleitung

4. Instructions for measuring with a mobile device

4.7.3 DiSEqC 1.0 settings

Under the „Switch" menu item, select Di-
SEqC 1.0 if the system is operated with a
DiSEqC switch.
With the DiSEqC 1.0 version max. 4 satellites
can be managed.
Note:
For Monoblock LNBs, make sure to match the occupancy specified
by the manufacturer and set this for both satellites.
z. B. Megasat Monoblock LNB = Astra1 (Port 1) / Hotbird (Port 2)

4.7.4 DiSEqC 1.1 settings

Under the „Switch" menu item, select Di-
SEqC 1.1 if the system is operated with a
DiSEqC switch.
With the DiSEqC 1.1 version max. 16 satelli-
tes can be managed.
18
ENGLISH