Megasat HD 1 Smart Bedienungsanleitung Seite 35

2. Description and key assignment
1. Receiver
2. LNB
3. Transponder
4. Satelliten
5. Level / Qualität
Connection to a set-top box (DC 12-20
V / max. 10 W) or an external power
supply with DC 18 V, min. 1.2 A (optionally
available).
Connection to the LNB
Shows the currently selected transponder of the sa-
tellite. There are 8 different pre-programmed trans-
ponders for each satellite. The selected transponder
(1-8) is marked with a red LED. The preprogrammed
Transponder can be viewed via the app and and
adjust as necessary.
Shows the currently selected satellite. There are 8
pre-programmed satellites. The selected satellite
(1-8) is marked with a green LED. The pre-program-
med satellites can be viewed via the app and adjust
as necessary. The first three of the most used satelli-
tes are labeled with the orbit position.
19,2° O (for Astra1)
13,0° O (for Hotbird)
28,2° O (for Astra 2)
Displays the signal quality and
strength in 12 steps. These are di-
splayed with green LEDs.
ENGLISH
05