Troubleshooting - Megasat HD 1 Smart Bedienungsanleitung

7. Troubleshooting

Type
Angle calculation
Bluetooth connection
LNB setting
Software version
User manual
Powerbank
Meter
Failure
An incorrect angle is
displayed.
The Bluetooth connection
is aborted.
No reception possible.
Different displays and
functions.
Different displays and
functions.
Device starts constantly
new.
LED flashlight does not
work as described.
Device starts constantly
new.
ENGLISH
Solution
Wrong custom location.
Location sharing on „Auto"
is not enabled.
Deactivate standby mode,
update app, switch device
off / on.
Check LNB setting accor-
ding to the connected LNB
(Unicable, DiSEqC circuit, ...)
Check the device software
and the version of the app.
If necessary, update both
to always be up-to-date.
Download the current user
manual from our home-
page.
Check the charge status of
the battery. Only LNBs with
a current consumption
up to max. 200mAh can
be powered by the power
bank. If necessary, use the
receiver or a power adapter
for the power supply.
Check the charge status of
the battery. Always refer to
the operating instructions
for the power bank from
the current operating
instructions.
Only connect the LNB after
starting the meter to re-
duce the switch-on load. If
necessary, use the receiver
or a power adapter for the
power supply.
27