General Information; Safety Instructions; General Features - Megasat HD 4 Combo V2 Bedienungsanleitung

1. General information

1.1 Safety Instructions

• Never spill liquids of any kind on the appliance. Liquids increase the risk of electric
shock and damage to the product.
• The appliance is not shockproof. Do not use the unit as a hammer and take care that
it cannot fall from a great height.
• Do not immerse the appliance in water. Avoid moisture and store the product in a
dry place.
• Switch the unit off when not in use.
• Observe the specified power supply. Only use the mains adapter supplied to charge
the unit.

1.2 General features

• Extremely fast and accurate measurement with high sensitivity of
DVB-S / -S2 / -T / -T2 / -C / -C2 and analogue TV signals.
• Programmed satellite and transponder list
• 2.7 inch TFT LCD display with 400 x 360 pixels
• Unicable compatible (EN 50494 + EN 50607)
• Spectrum analysis
• Auto DiSEqC detection for DiSEqC 1.0
• Satellite and transponder identification
• Calculation of rotation and tilt angle of the antenna
• Control of the different planes (HH / HL / VH / VL).
• Measurement of switching voltage and 22 KHz commands.
• DiSEqC measurement and control of switching commands.
• Integrated compass function. If the measuring device is turned or tilted, the current
angle is automatically shown on the display. Alternatively, the selected satellite can
be displayed graphically to quickly determine the correct position.
• Display of dBµV, CNR, BER, MER, signal strength and quality in per cent
• Integrated power battery with up to 3 hours operating time
• Firmware updates via mini-USB (USB to mini-USB adapter optionally available)
1.3 Delivery
• Megasat HD 4 Combo V2
• 230 Volt charging adapter
• 12 Volt car charging adapter
• Protective cover incl. carrying strap
• User manual
ENGLISH
03