Activating Setting Mode - Eurochron WS1173 Bedienungsanleitung

c) Activating Setting Mode
Various basic settings are possible in the setting mode. The time and date can be entered manu-
ally here as well if no DCF reception is possible.
The following functions are available:
• Setting the Time Zone
• Selecting 12/24 h mode
• Manually setting the time (hours/minutes)
• Manually setting the date (year/month/day)
• Selecting temperature unit (°C, °F)
• Calibrating indoor humidity
• Calibrating outdoor humidity
• Selecting unit of the barometric pressure ("hPa" or "inHg")
• Calibrating barometric pressure
• Setting barometric pressure steps for weather forecast (default 2 hPa)
• Setting barometric pressure steps for weather icon "Storm" (default 4 hPa)
The setting mode is started by pushing the button "SET" for two seconds. The weather
station then emits a sound signal.
Briefly pushing the button "SET" takes you to the respective next setting.
Use the button "+" or "MIN/MAX" to change the set value. Keeping the respective
button down for some time will adjust quickly.
Leave the setting mode by briefly pushing the button "SNOOZE/LIGHT" or make the
last setting (alternatively wait for 10 seconds without pushing any button).
Proceed as follows:
• Hold down the button "SET" for 2 seconds. The time zone flashes.
Use the button "+" or "MIN/MAX" to adjust the time zone in the area of +12 to -12 hours.
• Briefly push the button "SET"; "24H" or "12H" flashes in the display.
Use the button "+" or "MIN/MAX" to switch the display 24 h and 12 h mode. In 12h mode, "PM"
is displayed to the left of the time in the second half of the day.
44