Product Description - VOLTCRAFT CT-3 Bedienungsanleitung

PRODUCT DESCRIPTION

The multimeter (referred to as DMM in the following) indicates measured values on
the digital display. The DMM measured value display comprises 2000 digits (digit =
smallest display value).
A rear positioning foot provides a slightly slanted position, which makes it easier to
read the display when measuring.
The individual measuring functions are selected using a rotary switch for which
„auto range", the automatic range selection, is active. The appropriate range of
measurement is set for each application individually.
The automatic cut-off is always active in order to help save the measuring device's
batteries. This automatically switches the device off after 15 minutes.
The current measuring ranges are protected by a microfuse.
The multimeter part of the device requires two microbatteries (type AAA) and the
cable tester is supplied with power by a 9 V block battery (supplied).
Further additional functions include:
• „HOLD" retains the last measured value on the display
• „MAX" retains the maximum value on the display
The measuring device can be used for do-it-yourself or for professional applica-
tions.
35