Error Messages; Part Number - Baumer Ne212 Betriebsanleitung

NE212
64

6.3 Error messages

Fault must be rectified by the factory.
Fault must be rectified by the factory.
Value for trailing preset is void.
Exessively fast sequences, i.e. inadequate intervals between pre-
sets at high counting frequency.
Counting frequency for track A or B too high.
Counting frequency for batch counter too high.
● Error messages
with the key.

7 Part number

NE212.
1
2
3
4
Interface
0 Without interface
1 RS485
2 RS422
3 RS232
www.baumer.com
and
AX A2
Supply voltage
1 24 / 48 VAC
2 85...265 VAC
3 24 VDC
Outputs
Relay outputs, B1 normally open
Relay outputs, B1 normally closed
Electronic outputs PNP
Electronic outputs NPN
can be cleared