Baumer NE212 Betriebsanleitung Seite 50

NE212
To change operating param. ➜ Input the new value via the numerical keypad.
Line 1
SC
Line 2
SC
Line 3
SC
Line 4
SC
Line 5
SC
Line 6
SC
Line 7
SC
Line 8
SC
50
Programming field 1
Information on the displays and changing individual values is also
given in part 4.
➜ Press the key again.
● The operating parameters are now called up. The respective LED
flashes.
XP - Current counter status
P1 - Preset value 1
P2 - Preset value 2
SC - Main counter start count value
∑ - Totalizer
XB - Batch counter status
B1 - Batch counter preset value
- Time meter
After the conclusion of the first programming segment, a broken
line appears in the display.
Programming procedure for removing the sign from ∑:
- Select line 5 (∑).
- Erase totalizing counter with the
- Operate the +/- key; „-oFF 0" appears in the display.
- The function can be activated or cut out with the repeated applica-
tion of the +/- key.
- When the line with the „-oFF 0" display is left, the output of the
sign by the totalizing counter is suppressed.
www.baumer.com
key.