[Vacation]; [Clock]; [Iwd Off]; [Filter Change] - Gaggenau RS 295 Gebrauchs- Und Montageanleitung

Note
Repeatedly press the button to change the time in
one-minute intervals. If the button is held down,
the time changes in 3-minute intervals.
4. Press the Options button to start the time cycle.
Switching off [timer]
To deactivate the function, simultaenously press
the setting buttons + and - for 3 seconds.
[eco]
This function switches the appliance to energy-saving
mode.
The appliance automatically sets the following
temperatures:
▯
Freezer compartment: : -16 °C
▯
Refrigerator compartment: +6 °C
Switching on the [eco]
1. Keep pressing the "options" button, until
the [eco] function is marked with an arrow.
2. Activate by pressing the setting button + (function
is framed).
Switching off the [eco]
1. Keep pressing the "options" button, until
the [eco] function is marked with an arrow.
2. Deactivate by pressing the setting button -
(function is no longer framed).

[vacation]

If leaving the appliance for a long period of time, you
can switch the appliance over to the energy-saving
vacation mode. The refrigerator compartment
temperature is automatically switched to +14 °C.
m
Caution
Do not store any food in the refrigerator compartment
during this time!
Switching on the [vacation]
1. Keep pressing the "options" button, until
the [vacation] function is marked with an arrow.
2. Activate by pressing the setting button + (function
is framed).
Switching off the [vacation]
1. Keep pressing the "options" button, until
the [vacation] function is marked with an arrow.
2. Deactivate by pressing the setting button -
(function is no longer framed).

[clock]

The time is indicated on the time display panel. You
can set the time with the [clock] function.
Setting the time
1. Keep pressing the "options" button, until
the [clock] function is marked with an arrow.
2. Activate by pressing the setting button + (function
is framed).
3. Press the setting buttons +/- to set the required
time.
4. Save the set time with the "options" button.
Note
If the [timer] function is switched on, the time is not
displayed.

[IWD off]

You can use this function to switch off the ice and
water dispenser.
m
Caution
▯
Before switching off the ice maker, it is most
important that you switch the water supply
to the appliance off for a few hours.
▯
Empty and clean ice cube container. Re-attach
the ice cube container. Ensure that the ice cube
container engages with the support.
Switching on [IWD off]
1. Keep pressing the "options" button, until
the [IWD off] function is marked with an arrow.
2. Activate by pressing the setting button + (function
is framed).
Switching off [IWD off]
1. Keep pressing the "options" button, until
the [IWD off] function is marked with an arrow.
2. Deactivate by pressing the setting button -
(function is no longer framed).

[filter change]

After 6 months you are prompted via the [filter
change] display message to replace the filter
cartridge.
Activating new filter cartridge
When the filter cartridge has been replaced,
the [filter change] function must be re-activated.
1. Change filter cartridge (see chapter "Water
filter").
39