KKT KOLBE EBMS4503S Benutzerhandbuch Seite 52

Using the appliance
Microwave operation
Information on the power setting
Microwave power
100%
80%
50%
30%
20%
Power Suitability
900 W • Boiling water, reheating
• Cooking poultry, fish and vegetables
700 W • Reheat
• Cooking mushrooms and shellfish
• Cooking dishes containing eggs or cheese
450 W • Cooking rice or soup
300 W • Defrosting
• Melting chocolate
and butter
100 W • Defrosting delicate foods
• Defrosting irregularly shaped food
• Softening ice cream
• Leaving yeast dough to rise
52
Display
900 W
700 W
450 W
300 W
100 W
Steam cooking operation
General notes
• Clean the water container before starting a steam
cooking function.
• If the water tank does not have enough water during
operation or when starting a steam cooking process,
this is indicated on the water tank level indicator
and a warning signal sounds.
In this case, refill water accordingly as described in the
following section.
• After filling the water, operation can be started
or continued with the
Filling the water tank
• To remove the water tank, touch the
The tank will then move out a few millimetres.
• Remove the container completely from the appliance
and open the cap (1) by loosening it from the closure
and turning it slightly to the side.
1
• Fill the container with tap water and replace the cap.
• Insert the tank back into the opening of the appliance
and push it in as far as it will go.
After steam cooking
• When the steam cooking process is finished, the water
remaining in the hoses is returned to the water tank.
This process takes about 1 minute and causes corres-
ponding noises.
• If, when returning the water to the water tank, it is
detected that the tank is already full, a beep sounds 10
times in succession.
Empty the water tank accordingly then.
After that, the water continues to be returned to the
tank.
• After steam cooking has finished, remove the water
from the cooking chamber and from the door pane.
• Empty the water container after steam cooking.
key.
key.