Jacuzzi J-460 Montageanweisung, Bedienung Und Wartung Seite 56

1
Jets 1 Button: Turns Jets pump 1 On and Off.
Mode
This allows you to select the mode of operation for the
lighting system.
2/3
Jets 2 & 3 Button: Turns Jets pump 2 On and Off.
WIRELESS REMOTE BATTERY REPLACEMENT
PROCEDURE
SNC LIGHT AIR
1 2/3 SPA
JETS
1. Start by removing the rubber cover to the remote.
2.Turn the remote unit over and locate the battery door.
OPEN CLOSED
3. Rotate the battery door, with a coin, counterclockwise until the
dot aligns with the Open arrow.
OPEN CLOSED
4. Remove battery door using coin to pry the door upward.
OPEN CLOSED
CR2025
5. Replace battery using CR2025 or equivalent.
OPEN CLOSED
6. Reinstall the battery cover, using the coin to close.
LIGHT MODE
Hot Tub
1 2/3
JETS
7. Reinstall rubber housing onto remote.
Note: Remote unit is water resistant not waterproof, therefore
the unit should never be left in the spa while the cover is on
and spa is not in use.
56