Operation; Menu Structure; Stand-Alone Mode - EuroLite UP-4 Entry Bedienungsanleitung

OPERATION

Turn on the device via the power switch. The display indicates the last operating mode. The operating
modes can be selected by means of the display and the control buttons. All settings remain stored even if
the device is disconnected from the mains. The device can be operated in stand-alone mode via the control
board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any commercial DMX
controller.

Menu structure

Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode or change values.
Confirm with ENTER.
Mode
DMX mode
Preset colors
Automatic mode
Sound control mode
Running speed in
automatic and sound mode
Microphone sensitivity for
sound control
Color mix
Dimmer
Silent scene
Behaviour in case of
missing DMX signal
Slave mode
ECO PRO
IR remote control
Version

Stand-alone mode

Preset colors
In the Stat mode the device will constantly emit one of 17 preset colors.
1 Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Display
8CH
6CH
Addr 4CH
4-1CH
3CH
Stat
Auto
Soun
SPEE
SEnS
Colo
dIMM
SILE
Lost
SLAV SLAVE MODE
ECo
InFr
V1.0
28/36
d001-d512 8-channel mode and start address
d001-d512 6-channel mode and start address
d001-d512
4-channel mode and start address
d001-d512
4-1-channel mode and start address
d001-d512
3-channel mode and start address
Constant lighting in one of 17 colors
S 01-17
Au 01 - 02 Auto program
So 01 - 02 Sound program
Program running speed
SP01 - 09
slow > fast
Microphone sensitivity
SE01 - 09
low > high
r000-255 Red 0-100%
G000-255 Green 0-100%
b000-255 Blue 0-100%
U000-255 White 0-100%
Total brightness
dl01-dl09
dark > bright
on LEDs off if there is no music signal
LEDs remain on if there is no music
oFF
signal
blaC LEDs go off
hold Spot holds the last received signal
FuLL All LEDs 100% on
Stat Pre-selected static color 01-17
Auto Pre-selected auto program 01-02
Slave mode
on Energy saving mode
oFF Regular mode
on IR remote control on
oFF IR remote control off
V1.0 Current software version 1.0
Function
00133326, Version 1.0