Werbung
Verfügbare Sprachen
Verfügbare Sprachen
* Measuring instruments should not be left in the hands of children!
2. introduction
This infrared thermometer is used for non-contact measurement of the
surface temperature of objects and can be used safely and quickly for
various hot, dangerous or hard-to-reach objects.
This device consists of an optic, a temperature sensor, a signal amplifier,
a processing circuit and an LCD display. The optics collect the infrared
energy emitted by the object and focus it on the sensor. Then the sensor
converts the energy into an electrical signal. This signal is digitally
displayed on the LCD display after the signal amplifier and processing
circuit.
3. distance to the spot size
When measuring, pay attention to the distance to the measuring spot size.
The greater the distance (D) from the target area, the larger the
measurement spot (S) of the area measured by the unit.
The ratio of distance to measuring spot is 12:1.
This unit is equipped with a laser that is used for aiming.
Make sure that the target is larger than the measuring spot of the device.
The smaller the target, the smaller the measuring distance. If accuracy is
crucial, the target must be at least twice as large as the measuring spot.
Werbung
