Selection Of The Additional Functions - Pkm WA9-ES1415DI Bedienungsanleitung

H
1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Press the « O
N
STANDBY MODE
5. Set the desired programme using the
6. The (10) indicates the duration of the programme (hours : minutes)
DISPLAY
7. Additionally, further functions such as temperature, spin speed, delay, etc. can be
selected by pressing the corresponding buttons; s. chapter 4.4.1 S
THE ADDITIONAL FUNCTIONS
8. Press the « S
TART
9. The door lock will be activated automatically. The operational status indicator of
the door lock goes on: «
10. When the programme is finished, the display indicates the word « END » and an
acoustic signal sounds (if the acoustic signals are activated / see also chapter 4.4.1
S
ELECTION OF THE ADDITIONAL FUNCTIONS
11. The door lock is deactivated automatically. The operational status indicator of
the door lock goes off: «
12. When the programme is finished, always press the « O
switch off the appliance completely; see also chapter 4.6 E
.
PROGRAMME
It is possible that the current run time of the selected washing programme will be
adjusted automatically so that it may vary from the washing time which is
indicated on the display.

4.4.1 Selection of the additional functions

F
OLLOWING ADDITIONAL FUNCTIONS CAN BE SELECTED
→ « T
FUNCTION EMP
→ « S
FUNCTION PIN
→ « D
FUNCTION ELAY END
→ « O
FUNCTION PTIONS
→ « O
FUNCTION PTIONS
→ « O
FUNCTION PTIONS
Depending on model.
31
OW TO SET AND START A WASHING PROGRAMME
/ O » button. The washing machine is now switched on and in
FF
.
.
/ P » -
AUSE BUTTON
».
».
. » =
SELECTION OF THE WASHING TEMPERATURE
» =
SELECTION OF THE SPIN SPEED
» =
DELAYED PROGRAMME
» = -
PRE WASH
» =
EXTRA RINSE
» =
INTENSIVE
.
ROTARY KNOB
(9) to start the washing programme.
).
~ ~
121
ELECTION OF
/ O » button to
N FF
ND OF A WASHING
:
E
NDS
.
31