Pkm WA9-ES1415DI Bedienungsanleitung Seite 123

If spin speed « 0 » has been selected, the final spin speed will be cancelled. Before
the programme ends, the appliance drains only the water.
In some washing programmes the settable spin speed is limited (depending on
model).
The « S » -
PIN
chapter 4.3 A
DDITIONAL FUNCTIONS
➢ To set the spin speed of a washing programme individually, press the
« S » -
PIN BUTTON
display.
If the selected programme cannot be combined with the desired functions, these
functions cannot be selected or will be cancelled and the indicators switches off
automatically.
❖ You can set this function to by pressing the « S
❖ The Quicker Wash indication lamp is on after the function is selected, the
indication lamp and ":" will flicker synchronously from the start to end of the
program, the indication lamp will be of after the program ends.
The Quicker Wash function is only added under the standby state of its applicable
program, that is, before the program is started. After the program is started, the
function cannot be selected.
❖ A pre-wash can be set for some washing programmes to increase the washing
effect and remove stains; see also chapter 4.3 T
❖ A pre-wash before a wash programme is particularly suitable for heavily soiled
textiles.
❖ When you activate the « P
wash compartment of the detergent drawer «
chapter 5.2 U
SE OF THE DISPENSER
may not be available for all programmes; see also
FUNCTION
H
OW TO SELECT THE SPIN SPEED
repeatedly until the desired spin speed is indicated on the
F
UNCTION
F « O
UNCTION
-
RE WASH
.
« S »:
CHNELL
CHNELL
»: -
PTIONS PRE WASH
HE ADDITIONAL FUNCTIONS
» - , also remember to fill the pre-
FUNCTION
ff.
~ ~
123
» Button.
» with detergent; see also
.