Displaying The Radio Data System Information - Yamaha MCR-E810 Bedienungsanleitung

4
Press PTY SEEK START to start searching
for available Radio Data System preset
stations.
If a station broadcasting the selected program type is
found, the receiver stops searching, and then program
service name and the PTY HOLD indicator lights up
in the front panel display.
If there is no station broadcasting the selected
program type, the frequency currently selected
appears.
y
To stop searching for stations, press PTY SEEK START
once again.
5
Repeat step 4 until the desired station is
found.
Displaying the Radio Data System
information
Use this feature to display the 4 types of the Radio Data
System information: PS (program service), PTY (program
type), RT (radio text) and CT (clock time). The
corresponding indicators light up in the front panel
display.
Notes
• You can select one of the Radio Data System modes only when
the corresponding Radio Data System indicator lights up in the
front panel display. It may take a while for the receiver to
receive all of the Radio Data System data from the station.
• You can select only the available Radio Data System modes
being offered by the station.
• If the signals being received are not strong enough, the receiver
may not be able to utilize the Radio Data System data. In
particular, the "RT" mode requires a large amount of data and
may not be available even when the other Radio Data System
modes are available.
• In case of poor reception conditions, press AUTO/MAN'L on
the front panel of the receiver so that the AUTO indicator
disappears from the front panel display.
• If the signal strength is weakened by external interference while
the receiver is receiving the Radio Data System data, the
reception may be cut off unexpectedly and "...WAIT" appears
in the front panel display.
• When the "RT" mode is selected, the receiver can display the
program information by a maximum of 64 alphanumeric
characters, including the umlaut symbol. Unavailable characters
are displayed with the "_" (underscore).
All manuals and user guides at all-guides.com
While tuning into a Radio Data System station,
press FREQ/TEXT repeatedly to select the
desired Radio Data System display mode.
Radio Data System Tuning (U.K. and Europe Models Only)
REPEAT
TV CH
PTY SEEK
MODE
TV INPUT
ON SCREEN
PRESET
INFO.
A-E ENTER
SET UP
TV VOL
DISPLAY
SLEEP
DVD/CD TUNER
TAPE/MD AUX/TV
PS
PTY
RT
CT
Frequency
• Select "PS" to display the name of the Radio Data
System program currently being received.
• Select "PTY" to display the type of the Radio Data
System program currently being received.
• Select "RT" to display the information on the
Radio Data System program currently being
received.
• Select "CT" to display the current time.
A-B
FREQ/TEXT
FREQ/TEXT
PROG
START
SHUFFLE
MENU
A-E
TOP MENU
/RETURN
VOLUME
BAND
TUNER
DOCK
41
En