Eigenprogramm (Home Made Programme) - Westfalia 80 33 71 Bedienungsanleitung

Eigenprogramm (Home made Programme)

Eigenprogramm (Home made)
Default settings for the home made programme are values from the basic
programme. This programme allows you to adjust the time for each step of
kneading, rise and baking according to your experiences. The 11.Eigenprogram
should only be used by experts with experiences in making breads.
1. Press the button Menü to select the programme 11. The setable time range
for each programme is as follows:
KNET1
AUFGEH1
KNET2
AUFGEH2
AUFGEH3
BACKEN
WARM
2. Press the button Programm. The display shows
3. Press the button Zeit to adjust the minutes. If you press the button once, the
value will increase by one digit. If you keep the button pressed, the value will
increase rapidly.
4. Afterwards press the button Programm to confirm the time and enter the next
step automatically. The display shows
5. Press the button Zeit to adjust the minutes for rising. Then press the button
Programm to confirm the setting. You will enter the next step automatically.
In the same way set the remaining steps. Upon finishing setting for all above
steps, press START/STOP to exit the setting.
If you have made a mistake and want to change the settings, press the
buttons Programm and Zeit again, in order to skip to the desired option.
6. When pressing the START/STOP button, the bread maker will start operating.
Please note that the settings will be memorised and are still effective for next
use except of power cut-off (unplugging the plug from the wall socket).
Standby Consumption is 0.8 W.
3 – 14 Minutes
20 – 60 Minutes
8 – 24 Minutes
1 – 60 Minutes
20 – 120 Minutes
0 – 80 Minutes
0 – 120 Minutes
25
Kneading Time
Rising
Kneading Time
Rising
Rising
Baking Time
Keep Warm Time
KNET1
.
AUFGEH1
.