Machine Data; Safety Instructions - Ferm AGM1037 Originalbetriebsanleitung

EN
ANGLE POLISHER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2-3.
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentation with the machine.
Contents

1. Machine data

2. Safety instructions

3. Assembly
4. Use
5. Service & maintenance
Introduction
The hand held electric polisher is suitable for
non-professional use. Any other use other than
polishing and light sanding is strictly forbidden.
1. Machine data
Technical specification
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
4
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications,
or with different or poorly maintainted
accessories, may significantly increase the
exposure level
- the times when the tool is switched off or
when it is running but not actually doing the
job, may signifi cantly reduce the exposure
level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Angle polisher
1 U-shaped handle
1 Hexagon key
1 Instruction manual
1 Safety instructions
1 Warranty card
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. 1
1. On/off switch
2. Speed controle
3. U-shaped handle
4. Pad holder
5. Spindle lock
230 V 6. Switch lock
50 Hz
1400 W 2. Safety instructions
0-3200/min
180 mm Explanation of the symbols
M 14
3.4 kg
85+3 dB(A)
96+3 dB(A)
11.59+1.5 m/s
2
Denotes risk of personal injury, loss of
life or damage to the machine in case of
non-observance of the instructions in
this manual.