Herunterladen Inhalt Inhalt Diese Seite drucken

Machine Data; Safety Instructions; Maintenance - Ferm ATM1037 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
EN
BLOW GUN
Read the safety and operating
instructions of the air tool and the
compressor before using the appliance.
Contents:

1. Machine data

2. Safety instructions

3. Use

4. Maintenance

1. Machine data
Technical specifications
Recommended pressure
Max. pressure
Nozzle diameter
Weight
2. Safety instructions
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
In accordance with essential
applicable safety standards of
European directives
Wear protective gloves
Wear eye protection
Safety instructions
Always read the user manual of the
compressor and of the objects and/or
materials you use.
Avoid too high pressure
Never blow or spray in direction of yourself or
others; this could cause serious injury.
Keep bystanders and pets away
Children and animals should be kept far away
from the area of operation of the machine.
If you use the compressor to spray paint:
Do not work in enclosed spaces or near
naked flames.
Make sure that the environment in which
2
you will be working has dedicated
ventilation.
Protect your nose and mouth with a
dedicated mask
If the compressor is no longer in use, always
take the plug out of the plug socket.
Always make sure that compressed-air hoses
are used for compressed air and which are
characterised by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.
3. Use
Only use the compressor with accessory in a good
2 - 4 bar
ventilated area.
8 bar
2.0 mm
Connect the PU hose between compressor
0.15 kg
and accessory
Slide the hose-coupler on the accessory until
the coupler clicks. Now the hose is connected
correctly.
To release the coupler, pull the outside ring
backwards.
Always be aware of small particles which can
release and cause injury. Do not point the blow
gun towards yourself during cleaning activities.
4. Maintenance
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Warranty
For the conditions of guarantee, please refer to the
separately provided guarantee card.
Ferm

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis