Herunterladen Inhalt Inhalt Diese Seite drucken

Machine Data; Safety Instructions; Maintenance - Ferm ATM1041 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
TYRE INFLATOR, WITH PRESSURE
GAUGE
Read the safety and operating
instructions of the air tool and the
compressor before using the appliance.
Contents

1. Machine data

2. Safety instructions

3. Use

4. Maintenance

1. MACHINE DATA
Technical specifications
Operating pressure
Length of hose
Weight
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the
following symbols are used:
Wear protective gloves
Wear eye protection
Safety instructions
• Avoid too high pressure
• Never blow or spray in direction of yourself or
others; this could cause serious injury.
• Keep bystanders and pets away
• Children and animals should be kept far away
from the area of operation of the machine.
• If you use the compressor to spray paint:
a) Do not work in enclosed spaces or near
naked flames.
b) Make sure that the environment in
which you will be working has dedicated
ventilation.
c) Protect your nose and mouth with a
dedicated mask
2
• If the compressor is no longer in use, always
take the plug out of the plug socket.
• Always make sure that compressed-air
hoses are used for compressed air and which
are characterised by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.
3. USE
First check de pressure of the object.
• Connect the coupling of the gun with the valve
of the object
• Read the pressure on the gauge:
• Pressure too high: press the button on the left
side to release air.
0 - 8 bar
• Pressure too low: press the trigger to fill the
350 mm
object till required pressure.
0.40 kg
• Check pressure by releasing the trigger and
read the pressure gauge.
• Disconnect the tyre inflating gun.
Average pressure
Object
Soccerball
Basketball
Volleyball
Lawn-tractor tyre
Air bed
Bicycle tyre
Check the service-manual of your car for
the correct tyre pressure of your car.
4. MAINTENANCE
Trouble shooting
• No air flow.
• Check the air pressure.
• Check hose connector (connected correctly?).
• Check the air hose on leakage.
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card.
Pressure (psi)
Pressure (bar)
13
9
5
20
hard
75
0.8
0.6
0.3
1.3
hard
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis