Notes For Your Safety; General Information - Gemü 1434 mPos Original Einbau- Und Montageanleitung

Contents
1 Notes for your safety
1.1 General information
1.2 Safety notes
1.3 Correct use
1.4 Information on use in damp
conditions
1.4.1 Converting to protection
class IP 67
1.5 Installation position
1.6 Tools required for installation and
assembly
1.7 Service and maintenance
2 Manufacturer's information
2.1 Delivery
2.2 Function
3 Mechanical mounting
3.1 Assembling the travel sensor
3.2 Mounting the positioner
3.3 Mounting the external travel
sensor (only for version with
remote mounting)
3.4 Mounting the positioner using a
mounting bracket
4 Pneumatic connections
5 Electrical connections
6 Initialisation and
commissioning
6.1 Electrical and pneumatic
connection
6.2 Automatic initialisation
6.3 Commissioning
7 Display elements
8 Error messages
9 Disposal
10 Returns
11 Information
12 Dimensions
13 Technical data
14 Order data
15 EU Declaration of Conformity
All manuals and user guides at all-guides.com
17
17
18
18
19
19
20
20
20
20
20
20
21
21
22
23
23
24
24
24
25
25
25
26
27
27
27
27
28
29
30
31
17 / 32
1

Notes for your safety

Please read the following notes carefully and
observe them!
1.1

General information

Important requirements to ensure that our
GEMÜ 1434 Pos works correctly:
• Correct transport and storage
• Installation and commissioning by trained
personnel
• Operation according to these installation,
operating and maintenance instructions
• Recommended maintenance
All rights including copyright
and industrial property rights are
expressly reserved.
The GEMÜ 1434 Pos must be used
in accordance with these directions.
All information in these installation,
operating and maintenance instructions
regarding operation, servicing and
maintenance must be observed and
applied. If the information is not
observed, the operator's guarantee
rights and the manufacturer's legal
liability cease.
The manufacturer shall assume no
responsibility for the GEMÜ 1434 Pos
if this safety information is not observed.
Therefore, you must observe:
• the contents of these installation, operating
and maintenance instructions
• the relevant safety regulations for the
installation and operation of electrical
systems
• that this device must not be used in
potentially explosive areas.
The regulations, standards and guidelines
named in these installation, operating and
maintenance instructions are only applicable
in Germany. If the GEMÜ 1434 Pos is
used in other countries, the local applicable
regulations must be observed. When
dealing with harmonised European norms,
standards and guidelines, these apply within
the Single European Market. The operator
must also adhere to national rules and
guidelines, if applicable.
The descriptions and instructions in these
1434 µPos