Safety Notes; Correct Use - Gemü 1436 cPos eco Betriebsanleitung

1.3

Safety notes

Only qualifi ed and
G
trained personnel should
assemble, electrically
DANGER
connect and commission
the GEMÜ 1436 cPos eco.
Use qualifi ed personnel
for operation, servicing,
inspection and assembly.
The areas of responsibility,
the monitoring of personnel
and their competence areas
should be defi ned precisely
by the operator. Train
personnel with insuffi cient
knowledge or, if necessary,
have them trained by the
manufacturer / supplier on
order of the operator. Ensure
that all members of personnel
understand the safety
instructions.
Ensure that the power supply
G
equipment is electrically safe.
Ensure that the electrical
G
values are correct.
Exhaust air and cycle duties
generate noise!
® Hearing damage.
DANGER
Wear hearing protection.
G
If the safety information is disregarded
then persons, the environment and the
GEMÜ 1436 cPos eco may be endangered.
Furthermore, failure to observe the safety
information may lead to a complete loss of
claims rights.
Adhere to legal regulations.
1436 cPos eco
1.4

Correct use

7 The GEMÜ 1436 cPos eco is suitable for
use as defined in the data sheet. In order
to ensure correct product function, the
following notes should be observed. Pay
attention to the information on the product
labels.
7 Non-observance of these notes and
the notes in the general operating
instructions will lead to a loss of the
guarantee on the GEMÜ 1436 cPos eco
and of legal liability.
7 The GEMÜ 1436 cPos eco serves
solely as a positioner and must be used
according to the data sheet.
7 Any other use or use above and beyond
this is not permitted. GEMÜ shall not be
liable for any consequential damage. The
user carries sole risk.
7 Please pay attention to the pertinent
technical safety regulations when
planning both the use and operation
of the device. The designer, plant
constructor or operator is always
responsible for positioning and mounting
of the GEMÜ 1436 cPos eco.
30 / 56