Safety Notes; Correct Use - Gemü 1434 mPos Original Einbau- Und Montageanleitung

operating instructions refer to the standard
version.
The safety information does not take into
account unexpected incidents and events
which may occur during installation,
operation and servicing, or any local safety
regulations which must be adhered to by the
operator and by any additional installation
personnel.
If you have any questions, please do not
hesitate to ask your closest GEMÜ sales
office.
1.2

Safety notes

Only qualified and trained personnel
should assemble, electrically connect and
commission the GEMÜ 1434 Pos. Use
qualified personnel for operation, servicing,
inspection and assembly. The areas of
responsibility, the monitoring of personnel
and their competence areas should be
defined precisely by the operator. Train
personnel with insufficient knowledge
or, if necessary, have them trained by
the manufacturer / supplier on order of
the operator. Ensure that all members
of personnel understand the safety
instructions. Ensure that the power supply
equipment is electrically safe. Also ensure
that the electrical values are correct.
If the safety information is disregarded,
persons, the environment and the GEMÜ
1434 Pos may be endangered. Furthermore,
failure to observe the safety information may
lead to a complete loss of claims rights.
Adhere to legal regulations.
1434 µPos
All manuals and user guides at all-guides.com
1.3
The GEMÜ 1434 Pos is suitable for use
in specific fixed plant as defined in the data
sheet.
In order to ensure correct product function,
the following notes should be observed. Pay
attention to the information on the product
labels.
Failure to observe these notes and the notes
in the general installation, operating and
maintenance instructions will lead to a loss
of the guarantee on the GEMÜ 1434 Pos
and of legal liability.
The GEMÜ 1434 Pos serves solely as a
positioner and must be used as specified in
the data sheet. Any other use or use above
and beyond this is not permitted. GEMÜ
shall not be liable for any consequential
damage. The user carries sole risk.
When planning the use of the device and
when operating it, please follow the relevant
generally recognised technical safety
regulations. The designer, plant constructor
or operator is always responsible for the
positioning and mounting of the GEMÜ 1434
Pos.
18 / 32

Correct use